ASSEMBLY INSTRUCTIONS
GENERAL PUMP • 1174 Northland Drive • Mendota Heights, MN 55120
Phone: 651.686.2199 • Fax: 800.535.1745 • email: [email protected] • www.generalpump.com
Ref 310138 Rev C
07-19
GENERAL PUMP
A member of the Interpump Group
SAFETY PRECAUTIONS
WARNING!
Exposure of skin directly to
pressurized air or fluids could
result in severe bodily injury!
1. Make sure incoming pressure does not exceed the rated
pressure.
2. Use proper eye protection when assembling and using the
hose reel.
3. Assemble the hose reel on a clean workbench
free of debris and moisture.
4. Use soap and water when checking for air leaks.
5. Keep children away from work area.
DHRWM50200
Hose Reel
1. Connect the handle to the flange. Nuts go on handle side of flange.
2. Use (4) 5/16” or 8 mm bolts when securing the hose reel to cart or
wall.
3. Use thread sealant (not provided) on inlet threads and on outlet hose
(not provided).
4. Attach hose from pressure pump outlet to hose reel inlet.
5. Attach hose reel hose to swivel on hose reel
6. The hose reel is ready for operation.
AVAILABLE KITS
Item No. Part No. Description
Qty.
1
2550225 BRACKET, WALL MOUNT
1
2
2200054 SHCS
4
3
2200053 NUT, M8x1.25
4
4
2200013 WASHER, M8, SS
8
5
2200078 BOLT, LAG
4
6
2200008 WSHER, FLAT, M10
4
PARTS LIST
WALL MOUNTING KIT 2100531
