background image

 

 

 

WARNING!  Read  and  understand  all         
instructions. 

Failure  to  follow  all  instructions 

listed  below  may  result  in  electric  shock,  fire 
and/or  serious  personal  injury.  Replacement 
manuals  are  available  upon  request  at  no 
charge, or may be downloaded from our web-
site, 

www.drainbrain.com

.  Instructional  videos 

are available for download on our website, and 
may be ordered.  If you have any questions or 

problems, please call General’s customer 

 

service department at 412-771-6300. 

 

SAVE THESE INSTRUCTIONS!

 

GENERAL SAFETY RULES 

Cold-

Shot™ 

 

Operate  in  a  well  ventilated 
area.  Danger  of  suffocation.   

 

Carbon dioxide is heavier than air 
and  can  collect  at  ground  level 
and  displace  the  air  if  ventilation 
is inadequate.

 

Always  wear  gloves. 

Dry  ice 

causes  burns  if  it  comes  in  con-
tact with skin.

 

Always  wear  safety  glasses 
and  rubber  soled,  non-slip 
shoes. 

 

 

Use of this safety equip-

ment may prevent serious injury. 

These instructions are intended to  

familiarize all personnel with the safe  

operation and maintenance  

procedures for the Cold-Shot. 

 

DANGER indicates a hazard with a high level of risk 
which, if not avoided, will result in death or serious injury. 

WARINING indicates a hazard with a medium level of risk 
which, if not avoided, could result in death or serious injury. 

CAUTION indicates a hazard with a low level of risk which, 
if not avoided, will result in minor or moderate injury. 

 

This is the safety alert symbol. It is 

used to alert you to potential personal 

injury hazards. Obey all safety mes-

sages that follow this symbol to avoid 
possible  injury or death.

 

Do  not  over  tighten  freeze 
heads. 

Over-tightening increases 

the  possibility  of  freeze  head 
shattering.

 

Summary of Contents for Cold-Shot







Reviews: