General Measure Tuxon-A, User Manual

Page: 22 / 26

18
F3.2
0~24000
或
-
10000~10000
000000
Minimum analog quantity output.
If parameter
F3.1 is chosen “IOUT
”, then setting
range is 0~24000
；
If parameter F3.1 is chosen
“VOUT”, then
setting range is
“-
10000~10000
”and so on.
F3.3
F3.2~24000/
F3.2~10000
000000
The analog output value when zero.
F3.4
F3.3~24000/
F3.3~10000
000000
The when Maximum capacity.
F3.5
F3.4~24000/
F3.4~10000
000000
The Maximum analog output value.
N o t i c e :
1 .Setting method of “minus” in parameter F 3. 2 : When not
”0”
condition, press to
switchover
“ 0/-”
and then make choice for
“+/- ”
on the top digit.
2. Setting in sequence: F 3. 2~F 3. 5 and F 3. 2< =F3 .3 < <F3. 4 <=F 3. 5
。
5 Operation
5.1 Manual Zeroing
Under normal status, press to clear display data to zero.
Explanation for error display during manual zeroing:
“Error 2”: Current weight is not within the zeroing range.
“Error 3”: Display (system) is not stable.
5.2 Display D/A Output Value (Only for Tuxon-A)
Under normal status, press to make display content toggle between
weight and D/A output value, the DATA indicator lamp will be on when display content is
D/A output value.