IRD User Guide
15
AUD
•
Shows the audio channel pair, either channel 1 and channel 2 or
channel 3 and channel 4, associated with the displayed audio
control parameter data fields.
DYNHI (Configurable)
•
Allows the user to set the dynamic range compression to “Off”,
“Low”, “Mid” (Medium), or “Max” (High) modes for the high
level audio spectrum.
8.
Using the
Edit
knob and
Save
key, set the dynamic range compression
for the high level audio spectrum to “
Off
”.
DYNLO (Configurable)
•
Allows the user to set the dynamic range compression to “Off”,
“Low”, “Mid” (Medium), or “Max” (High) modes for the low-
level audio spectrum.
9.
Using the
Edit
knob and
Save
key, set the dynamic range compression
for the low level audio spectrum to “
Off
”.
EMBED (Configurable)
•
Allows the user to disable the four channel embedded audio in the
SDI digital output.
10.
Using the
Edit
knob and
Save
key, set the audio embedder to “
On
”.
11.
Repeat Steps 1 through 9 above for audio channels 3 and 4 with the
settings listed in Table 10 below:
Remote Menu (Configurable)
This menu contains parameters pertaining to remote control of the IRD. CBS does not support
remote control of standalone IRD’s. See contacts given in Foreword of this document if
further details are required. Also see GI Operator’s Guide.
CH #
LEV
FORMAT
DYNHI
DYNLO
EMBED
1/2
115
AC3SUR
Off
Off
On
3/4
115
AC3SUR
Off
Off
On
Table 10: IRD Audio Configuration
