General Dynamics Itronix GoBook MR-1, Getting Started Manual

Page: 4 / 16

4 2007.07.23 73-0174-001
Compliance Statements
The GoBook MR-1 (IX750) computer has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
If trouble is experienced with this equipment, please contact the equipment manufacturer for repair
and/or warranty information. Do not attempt repairs of this equipment yourself without obtaining
manufacturer authorized parts and documentation.
The product you have purchased is powered by a rechargeable battery. The battery is recyclable
and, under various state and local laws, it may be illegal to dispose of this battery into the municipal
waste stream. Do not crush the battery or place it in a fire. Check with your local solid-waste officials
for details on recycling options or proper disposal.
CAUTION Internal components of the GoBook MR-1 (IX750) computer will be damaged if exposed
to contaminants. When dust covers are open on the computer, shield the unit from all contaminants
such as liquids, rain, snow, and dust.
Each internal radio may or may not have an individual FCC Identifier label. That FCC Identifier label
is not applicable to this configuration. Only the external FCC ID is applicable.
Only the antenna with which an intentional radiator is authorized may be used with the intentional
radiator.
The WAN antenna location is in the upper right edge of the display screen and is not to be
modified.
The WLAN embedded dual antennas are located internally in the upper right and left edges of the
display housing and are not to be modified.
This device contains a WLAN radio transmitter and a WAN radio transmitter. To comply with FCC RF
exposure requirements when using the WAN radio transmitter, a minimum separation distance of 20
cm must be maintained between the external dipole antenna and all users/bystanders. When using
the WLAN transmitter, a minimum separation distance of 20 cm must be maintained between the
upper right and left edges of the display screen and all users/bystanders. The WAN radio and
WLAN transmitter should be turned off before carrying the Laptop PC in order to comply with FCC
RF exposure requirements.
The equipment has been approved to [Commission Decision “CTR21”] for pan-European single
terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences
between individual PSTNs provided in different countries the approval does not, of itself, give an
unconditional assurance of successful operation on every PSTN network termination point.
In the event of problems, you should contact your equipment supplier in the first instance.