background image

General Dynamics Itronix 72-0146-001

GD8200 User Guide

GD8200 User Guide

Notices, Compliance and Safety

Identification:  GD8200 User Guide

Copyright Notices

© Copyright 2011 General Dynamics. All rights reserved. 
No part of this document may be reproduced, transmitted, 
transcribed, stored in a retrieval system, or translated into 
any other language or computer language in whole or in 
part, in any form or by any means, whether it be electronic, 
mechanical, magnetic, optical, manual, or otherwise, without 
the prior written consent of General Dynamics Itronix 
Corporation, 1000 Sawgrass Corporate Parkway, Suite 300, 
Sunrise, FL 33323.

Disclaimer

General Dynamics Itronix reserves the right to revise the 
manual and make periodic changes to the content without 
a direct or inferred obligation to notify any person of such 
revision or changes. General Dynamics Itronix Corporation 
does not assume responsibility for the use of this manual, nor 
for any patent infringements or other rights or third parties 
who may use the manual.

This document contains proprietary information of General 
Dynamics Itronix Corporation.

This product is available for purchase under General Dynamics 
Itronix’s standard terms and conditions of sale. Hardware 
products may be reconditioned, or be manufactured from 
parts and components that may be new, used, rebuilt, or 
recycled and in some cases, the hardware product may not 
be new and may have been previously installed. In any event, 
General Dynamics Itronix warranty terms apply.

Trademark and Patent Notice

Itronix is a registered trademark of General Dynamics Itronix 
Corporation.

Microsoft, MS, Windows

®

, and MS-DOS are registered 

trademarks of Microsoft Corporation.

The following United States Patent Numbers apply to any 
unit which incorporates a DVD drive - 5,434,678; 5,589,945; 
5,913,013; 6,151,444; and 6,208,805.

This product incorporates copyright protection technology 
that is protected by U.S. patents and other intellectual property 
rights. Use of this copyright protection technology must be 
authorized by Macrovision, and is intended for home and 
other limited viewing uses only unless otherwise authorized 
by Macrovision. Reverse engineering or disassembly is 
prohibited.

ENERGY STAR

®

 is a registered trademark of the U.S. 

Environmental Protection Agency. As an ENERGY STAR

®

 

partner, General Dynamics Itronix has determined this 
computer meets ENERGY STAR

®

 program requirements for 

computers.

Compliance Statements

The GD8200 fully-rugged notebook has been tested and found 
to comply with the limits for a Class B digital device, pursuant 
to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, uses, 
and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there 
is no guarantee that interference will not occur in a particular 
installation.

If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:

 

„

Reorient or relocate the receiving antenna.

 

„

Increase the separation between the equipment and receiver.

 

„

Connect the equipment into an outlet on a circuit different from 
that to which the receiver is connected.

 

„

Consult the dealer or an experienced radio/TV technician for 
help.

The GD8200 fully-rugged notebook complies with Part 68 
of the FCC Rules. On the bottom of this equipment is a label 
that contains, among other information, the FCC registration 
number and ringer equivalence number (REN) for this 
equipment. If requested, this information must be provided to 
the telephone company.

The REN is used to determine the quantity of devices which 
may be connected to the telephone line. Excessive RENs on the 
telephone line may result in the devices not ringing in response 
to an incoming call. In most, but not all areas, the sum of the 
RENs should not exceed five (5.0). To be certain of the number 
of devices that may be connected to the line, as determined by 
the total RENs, contact the telephone company to determine 
the maximum REN for the calling area.

The GD8200 fully-rugged notebook may be connected to the 
telephone network using the RJ-11 jack provided.

If this equipment causes harm to the telephone network, the 
telephone company will notify you in advance that temporary 
discontinuance of service may be required. If advance notice 
isn’t practical, the telephone company will notify the customer 
as soon as possible. Also, you will be advised of your right to 
file a complaint with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, 
equipment, operations, or procedures that could affect the 
operation of the equipment. If this happens, the telephone 

Summary of Contents for GD8200



























































Reviews: