![background image](http://html1.mh-extra.com/html/general-datacomm/packetmate-1000/packetmate-1000_user-manual_2210297012.webp)
Extended temperature: ?10 to 65 °C
Storage temperature: ?20 to 75 °C
Options
LAN Cards: 1-port 10/100 Ethernet
WAN Cards: 1-port T1/E1 or 1-port sync serial
Power Supply Option: +24 VDC or -48 V DC
Chapter 2: Installation and Setup
Overview
The PacketMate 1000 Router is pre-assembled, tested, and ready for use. This chapter provides procedures for
installing the unit, power connections, the product cards, and finally, making system connections. If this is
your first installation, you should be familiar with Chapter 1, Introduction and Specifications , for a better
understanding of the features and use of the unit in your network.
Unpacking Instructions
The unit components are shipped in shock-absorbent packing within a corrugated box. Remove each
component from the box and perform a thorough visual inspection. If damage has occurred to any component,
contact the shipper immediately. All damaged components must be retained until an inspection by the shipper
has been completed. If it is necessary to re-package and return the unit, use the original packing materials and
box.
Installation Procedures
Unpacking The Router
This section describes the installation of the PacketMate 1000 Router and it?s standard equipment. It does not
describe the configuration or other details of specific plug-in product cards UAS family products that it
houses; for that information, refer to Related Publications on page ii.
External devices are connected to the router through standard connectors ports which are located on
the rear panel of the router and the ports on optional cards located on the rear panel.
•
Place the unit in a ventilated area where the ambient temperature does not exceed 104 oF (40 oC).
•
Do not install the unit directly above equipment that generates a large amount of heat (such as power
supplies).
•
AC Power Connection
Before making connections, determine whether the unit can be powered from the same AC circuit as the
Business Equipment it will be communicating with. Having the unit and the Business Equipment on the same
AC circuit prevents large circulating currents caused by differences in ground potential.
001
8
Specifications
Summary of Contents for PacketMate 1000
