11
Whale 2200A User Manual
2.5 Room Temperature Sensor Installation
Room temperature sensor
is installed on the wall,
away from sources of heat
and direct sunlight, at a
height of about 4-5 feet
from the floor. This will
ensure the best
temperature reading.
Avoid installing the sensor
on perimeter walls of the
vehicle.
Drill a 10mm (3/8”) hole to install the sensor.
Figure7: Room Sensor
Figure8: Unit controller
1) Control knob; 2) Cooking mode button;
3) Cooking indicator (red);
4) Air heater indicator (yellow);
5) Air heating mode button;
6) Ventilation mode;
7) Ventilation indicator (green)
When in air heater mode, the
dial controls the temperature
setpoint in range of +5C~35C.
