Generac Power Systems GC2200T, Owner'S Manual

Page: 9 / 84

Owner’s Manual for Trimmer/Mower™ 5
General Information and Setup
Section 2: General Information and Setup
A Handlebar Adjuster
B Oil Fill
C Recoil Starter
D Throttle Control Lever
E Trimmer Head Engage Bar
F Fuel Fill
G Cutting Cord
H Mow-Ball™
I Trimmer Guard
005826
A
B
F
E
H
C
D
I
G
Figure 2-1. Features and Controls
Trimmer/Mower™ Specifications
Engine Briggs and Stratton 6.75 EXi Manual
Engine Speed 3500 rpm
Cutting Width 22 in (55.88 cm)
Cutting Height
Five position,
1.5 in (3.8 cm) to 3.5 in (8.89 cm)
Cutting Speed
Cord Size
Green .155 in (3.9 mm) round, blue .175
in (4.4 mm) spiral
Wheels
14 in (35.56 cm) x 1.75 in (4.4 cm) wide,
resin, steel bearings
Handlebars Straight
Frame 14 gauge steel
Mow-Ball®
4 in (41 cm) diameter,
super-tough nylon
Drive Belt
Machine
Dimensions
50.4 in x 21.5 in x 38.3 in
(1.28 m x 54.61 cm x 97.3 cm)
Machine Weight
57 lbs (26 kg)
A complete specification sheet is included in the
documentation provided with the unit at the time of
purchase. For additional copies, contact Generac
Customer Service at 1-888-436-3722 (1-888-
GENERAC), or
www.generac.com
Emissions
The United States Environmental Protection Agency (US
EPA) (and California Air Resources Board (CARB), for
engines/equipment certified to California standards)
requires that this engine/equipment complies with exhaust
and evaporative emissions standards. Locate the emissions
compliance decal on the engine to determine applicable
standards. For emissions warranty information, please ref-
erence the included emissions warranty. It is important to
follow the maintenance specifications in the manual to
ensure that the engine complies with the applicable emis-
sions standards for the duration of the product’s life.
3800 rpm
V-Belt, 3L, gates PoweRated 6744