Generac Power Systems GC1000S, Owner'S Manual

Page: 10 / 72

6 Owner’s Manual for 10 Ton Kinetic Splitter
General Information and Setup
Components and Controls
B
C
D
H
I
J
K
L
G
E
010947
F
A
Figure 2-1. Component Locations
A Belt guard E Electric motor I Splitting wedge
B ON/OFF switch F Two hand operation lever J Frame stand
C Circuit breaker switch G Ram K Flywheel
D Engagement handle H Cradle L Belt
Know Your 10 Ton Kinetic Splitter
(000100a)
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
WARNING
See Figure 2-1 . Be familiar with the controls and features
of the unit prior to operation. Read this manual thor-
oughly before assembling and operating this unit. Save
this manual for future and immediate reference.
Remove Contents from Carton
1. Remove and verify the carton contains the follow-
ing prior to assembly:
Description QTY
Phillips head screwdriver 1
12/14 mm wrench 1
2. Contact Generac Customer Service at 1-888-436-
3722 (1-888-GENERAC), or
www.generac.com
with the unit model and serial number for any miss-
ing carton contents.
3. Record model, serial number, and date of pur-
chase on front cover of this manual.