ii
Owner’s Manual for 50 Hz Air-Cooled Generator Sets
Use this page to record important information about this generator set.
Record the information found on your unit data label on this
page. See
for the location of the unit
data label. The unit has a label plate affixed to the inside
partition, to the left of the control panel console as shown in
. See
for directions on how to open the
top lid and remove the front panel.
Always supply the complete model and serial numbers of the
unit when contacting an Independent Authorized Service
Dealer (IASD) about parts and service.
Operation and Maintenance:
Correct maintenance and
care of the unit ensures a minimum number of problems, and
keeps operating expenses at a minimum. It is the operator’s
responsibility to perform all safety inspections, to verify all
maintenance for safe operation is performed promptly, and
to have the equipment inspected periodically by an IASD.
Normal maintenance, service, and replacement of parts are
the responsibility of the owner/operator and are not consid-
ered defects in materials or workmanship within the terms of
the warranty. Individual operating habits and usage may con-
tribute to the need for additional maintenance or service.
When the generator requires servicing or repairs, Generac
recommends contacting an IASD for assistance. Authorized
service technicians are factory-trained and are capable of
handling all service needs. To locate the nearest IASD,
please visit the dealer locator at:
www.generac.com/Dealer-Locator
.
Model:
Serial:
Production Date:
Volts:
LPG Amps:
NG Amps:
Hz:
Phase:
Controller P/N:
Summary of Contents for G0071450
Page 4: ...iv Owner s Manual for 50 Hz Air Cooled Generator Sets...
Page 47: ......
