Generac Power Systems DF 2.2, Owner'S Manual

Page: 12 / 16

8 Owner’s Manual for DF 2.2 Dust Suppression System
Operation
Stopping the Unit
1. See Figure 3-1 . Close water valve (A).
2. Wait for water to stop spraying from nozzles (B).
Figure 3-3. Stopping the Unit
3. See Figure 3-4 . Press stop button (C).
Figure 3-4. Stopping the Unit
Adjusting Jet Angle
1. See Figure 3-5 . Pull tilting blower knob (A).
2. Use handle (B) to tilt blower to desired angle.
3. Release tilting blower knob to lock position.
Figure 3-5. Adjusting Jet Angle
Lifting the Unit
1. Verify the equipment being used to lift the unit is in
good condition and has sufficient capacity. For
approximate weights, see
Specifications .
2. See Figure 3-6 . Always remain aware of people
and objects around the work site when moving or
lifting the unit.
• When lifting the unit, attach any slings, chains, or
hooks directly to the central lift point (A).
• Use forklift pockets (B) with care. Avoid
approaching the unit at an angle, as this can
permanently damage the forklift pockets, tires, or
cabinet. Verify any obstructions are clear of the
forklift tines before lifting.
Figure 3-6. Lifting Points
A
008844
B
B
008844
C
A
B
008857
WARNING
Personal injury. Failure to properly connect
lifting cables, chains, or straps could result in
death, serious injury, or property damage.
(000346)
WARNING
Personal Injury. Do not use lifting eye if there are signs
of damage or corrosion. Doing socould result in death,
serious injury, or property damage.
(000433)
WARNING
Personal Injury. Do not use lifting eye other than as
directed. Doing so could result in death, serious injury,
or property damage.
(000434)
A
008844
B