Generac Power Systems 1296-0, Owner'S Manual

Page: 4 / 20

4
Generac Portable Products 1,800 PSI High Pressure Washer
High Pressure Hose
Adjustable Nozzle
attached to
Nozzle Extension
Safety Goggles
Choke Lever
Throttle Lever
High Pressure Outlet
Pump equipped with
Automatic Cool Down
System
Spray Gun
Water Inlet
Oil Fill
Recoil Starter
Air Cleaner
Chemical Injection Tube
KNOW YOUR PRESSURE WASHER
Read this owner’s manual and safety rules before operating your high pressure washer.
Compare the illustrations with your high pressure washer to familiarize yourself with the location of the controls.
Save this manual for future reference.
Adjustable Nozzle — Always attached to nozzle
extension. Adjustable nozzle allows you to adjust spray
pressure and spray pattern.
Air Cleaner — Dry type filter element limits the
amount of dirt and dust that gets in the engine.
Automatic Cool Down System — Cycles water
through pump when water reaches 140°-145°F. Warm
water will discharge from pump onto ground. This
system prevents internal pump damage.
Chemical Injection Tube —Used to siphon chemical
from the detergent container into the water stream.
Choke Lever — Prepares a cold engine for starting.
High Pressure Hose — Connect one end to high
pressure outlet and the other end to spray gun.
High Pressure Outlet — Connection for high pressure
hose.
Oil Fill —Add and check engine oil here.
Pump — Develops high pressure.
Recoil Starter — Used for starting the engine.
Safety Goggles — Always use the supplied goggles
or other eye protection when running your pressure
washer.
Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes safety
latch.
Throttle Lever —Sets engine in starting mode and
stops a running engine.
Water Inlet — Connection for garden hose.