background image

GENER

A

C

Generac 1500PSI  High Pressure Washer

LIMITED PRESSURE WASHER WARRANTIES  

(includes “Master Contractor”)

GENERAC warrants to the original retail purchaser, the pressure washer manufactured by GENERAC to be

free from defects in material and workmanship for the period(s) set forth below from the date of original pur-

chase.  This warranty is not transferable.  The term “original purchaser” means the person for whom the

pressure washer is originally purchased.

Warranty Schedules

Electric Power Washer

1 year (does not apply to commercial or rental operations)

CONSUMER*

COMMERCIAL*

Generac GN-Series Engine-driven    Engine:          2 years 

1 year

Power Washer

(2nd year parts only)
Pump:          1 year

90 days

All Other Engine-driven

Engine:   Warranted solely by 

Warranted solely by

Power Washers

Engine Manufacturer

Engine Manufacturer

Pump:          1 year 

90 days

* NOTE:  For the purpose of this warranty “consumer use” means personal residential household use

by original purchaser.  “Commercial Use” means all other uses, including rental, construction, com-

mercial and income producing purposes.  Once a pressure washer has experienced commercial use,

it shall thereafter be considered a commercial use pressure washer for the purposes of this warranty.

During said warranty period, GENERAC will, at its option, repair or replace any part which, upon examination

by GENERAC or GENERAC Authorized Dealers, is found to be defective under normal use and service**.

All transportation costs under warranty, including return to the factory if necessary, are to be borne by the pur-

chaser and prepaid by the purchaser.

** NORMAL WEAR:  As with all mechanical devices, the GN-Series engines need periodic parts ser-

vice and replacement to perform well.  This warranty will not cover repair when normal use has

exhausted the life of a part or an engine.

THIS WARRANTY DOES NOT INCLUDE:  Used products and demonstration equipment.  Parts such as

GUNS, HOSES, WANDS, NOZZLES or other wear items such as quick couplers, oil, gauges, belts, O-rings,

filters, pump packing, etc.  Pumps which have been run without water supplied.  Damage or malfunctions

resulting from:  accidents, abuse, modifications, alterations, or improper servicing.  Freezing or chemical dete-

rioration.  Normal maintenance such as adjustments, fuel system cleaning and obstruction (due to chemical,

dirt, carbon or lime, etc.).
THIS WARRANTY IS IN PLACE OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, SPECIFICALLY,

GENERAC MAKES NO OTHER WARRANTIES AS TO MERCHANTABILITY OR FITNESS FOR A PARTICU-

LAR PURPOSE.  The duration of any implied warranties which cannot be disclaimed is limited to the time

period as specified in the express warranty.  LIABILITY FOR CONSEQUENTIAL, INCIDENTAL, OR SPECIAL

DAMAGES UNDER ANY AND ALL WARRANTIES IS EXCLUDED, EVEN IF SUCH DAMAGES ARE A

DIRECT RESULT OF GENERAC’s NEGLIGENCE.  Some states do not allow limitations on how long an

implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limi-

tations or exclusions may not apply to you.  This warranty gives you specific legal rights and you may also

have other rights, which vary from state to state.
For service, see your nearest GENERAC authorized warranty service facility or call 1-800-333-1322.  War-

ranty service can be performed only by a GENERAC authorized service facility.   This warranty will not apply

to service at any other facility.  At the time of requesting warranty service, evidence of original purchase date

must be presented.

GENERAC CORPORATION 

Summary of Contents for 1067-0





















Reviews: