7
Generac Portable Products 1300 PSI Pressure Washer
HOW TO SET UP
PRESSURE WASHER
Unwind the high pressure hose and attach it to spray
gun (Figure 2).
Attach the high pressure hose to the high pressure
outlet and tighten by hand (Figure 3).
Included with this unit is a quick-connect fitting that
you must attach to the water inlet and your garden
hose. You can install the male connector by hand
but you may need to use an adjustable wrench to
tighten it (Figure 4).
Check the screen on the female connector. Make
sure it is clean and check for damage.
If you see
any damage in the screen, do not use that
female connector.
Call the pressure washer
helpline to order a replacement.
Attach the female quick connect to your garden
hose.
Attach garden hose to the water inlet using the
quickconnect. The quickconnect should lock in
place. (Figure 5).
Figure 2 Attach High Pressure Hose to Spray Gun
Connect high pressure
hose here
Figure 3 Attach High Pressure Hose to Main Unit
Figure 4 Install QuickConnect
Figure 5 Connect Garden Hose to Water Inlet
Male
QuickConnect
Female
QuickConnect
Summary of Contents for 1281-0
Page 13: ...NOTES 13 Generac Portable Products 1300 PSI Pressure Washer...
Page 14: ...14 Generac Portable Products 1300 PSI Pressure Washer EXPLODED VIEW PUMP AND MOTOR...
Page 16: ...16 Generac Portable Products 1300 PSI Pressure Washer EXPLODED VIEW MAIN UNIT...
Page 19: ...NOTES 19 Generac Portable Products 1300 PSI Pressure Washer...
