10
Stereo Pair with a Subwoofer (AES/EBU Dual-Wire)
This setup has two AES/EBU cables. Each carries one audio channel.
This mode assumes the source uses the Dual-wire mode of transmission. In this mode the AES/EBU
interface is operating at double speed (96 kHz) but consecutive audio samples use both subframes,
resulting in quad sample rate (19 kHz).
Run two AES/EBU cables from the source to the subwoofer AES/EBU Inputs 1 and . Run two audio
cables from the subwoofer AES/EBU outputs 1 and to the digital audio inputs of the left and right
loudspeakers. The correct subframe must be selected in each loudspeaker.
Cable number
Subframe
Audio channel
Subwoofer Input
Connector
Loudspeaker
Input Connector
1
A+B
Left
AES/EBU INPUT 1
DIGITAL IN
2
A+B
Right
AES/EBU INPUT
DIGITAL IN
