4
See Genelec Accessories Catalogue on www.genelec.com for a complete list of
mounting hardware options. The accessories can come with instructions on the
proper methods of installation.
Figure 3. Connectors and controls in the 4420A rear panel.
CONNECTING LOUDSPEAKERS
To get started, connect an Ethernet cable from the PoE+ output in an IP switch to
the 4420A Ethernet port. Use at least CAT5 cable or better. Press the power
switch to power up the loudspeaker.
To create a working system, you will need
•
IP switch with a PoE+ (802.3at) output for the 4420A loudspeaker
or an IP switch with no PoE support and a PoE+ power injector
•
CAT 5 or higher category Ethernet cable with RJ45 connectors
•
AES67, ST2110 or Dante audio-over-IP stream source
•
For 4420A setup and configuration, a computer running Macintosh OS X
or Windows 10 operating system
•
Genelec Smart IP Manager software
•
Dante Controller software or Dante Domain Manager software
THREADS FOR
WALL MOUNT
BRACKET
POWER
SWITCH
BALANCED
ANALOGUE
INPUT
ETHERNET
PORT
Summary of Contents for 4420A
Page 1: ...4420A Operating Manual ...
