7
SYSTEM SPECIFICATIONS
1032C
Lower cut-off frequency, –6 dB
< 33 Hz
Upper cut-off frequency, –6 dB
> 23 kHz
Accuracy of frequency response, ± 2.5 dB
40 Hz – 20 kHz
Maximum short term sine wave acoustic output on axis in half space, averaged from
100 Hz to 3 kHz at 1 m
≥ 114 dB SPL
Maximum long term RMS acoustic output in the same conditions with IEC weighted
noise (limited by driver protection circuit) at 1 m
104 dB SPL
Maximum peak acoustic output per pair in a listening room with music material at 1 m
124 dB
Self generated noise level in free space at 1 m on axis (A-weighted)
≤ 5 dB
Harmonic distortion at 90 dB SPL at 1 m on axis
Freq: 50…100 Hz
> 100 Hz
< 1 %
< 0.5 %
Drivers
Bass
Treble
All drivers are magnetically shielded
250 mm (10 in) cone
25 mm (1 in) metal dome
Weight
17 kg (37.4 lb)
Dimensions
Height
Width
Depth
495 mm (19
1
/
2
in)
320 mm (12
5
/
8
in)
290 mm (11
7
/
16
in)
* The notch and shelving filters adjustments, AutoCal
TM
and GLM
TM
manual system calibration features are part of the Genelec Loudspeaker Manager (GLM
TM
) software
AMPLIFIER SECTION
SIGNAL PROCESSING SECTION
1032C
Bass amplifier short term output power
Treble amplifier short term output power
(Long term output power is limited by driver protection circuitry)
250 W
150 W
Amplifier system THD at nominal output
<0.05%
Mains voltage
100-240 VAC 50/60 Hz
Power consumption
ISS active
Idle
Full output (short term)
< 1 W
11 W
200 W
1032C
Analog signal input connector XLR female, balanced 10 kOhm
Maximum analog input signal
Analog input sensitivity (100 dB SPL at 1 m)
Analog input gain selection, rotary control
pin 1 gnd
pin 2 non-inverting,
pin 3 inverting
+25.0 dBu
-6 dBu
Adjustable from +6 to -6 dBu
Digital signal input connector XLR female 110 Ohm
Digital signal output / Thru connector XLR male 110 Ohm
Digital audio input
Word length
Sample rate
Digital input sensitivity (100 dB SPL at 1 m)
Digital input gain sensitivity, rotary control
AES/EBU Single Wire
AES/EBU Single Wire
16 - 24 bits
32 - 192 kHz
-30 dBFS
Adjustable from +6 to -6 dBu
Control network
Type
Connection
Proprietary GLM™ network
2 RJ45, CAT5 cables
Crossover frequency
1.8 kHz
GLM
TM
software frequency response adjustment*
Parametric notch filters
Shelving filters
16
2 LF and 2 HF
System room response calibration
Genelec GLM AutoCal™ AutoCal
TM
, GLM
TM
manual,
Stand-alone*
