User Manual
GWR High Speed Cellular Router Series
72
Maintenance
– Date/Time Settings
To set the local time, select
Date/Time Settings
using the Network Time Protocol (NTP)
automatically or Set the local time manually. Date and time settings on the GWR Router are done through
window Date/Time Settings.
Figure 48– Date/Time Settings configuration page
Date/Time Settings
Label
Description
Manually
Sets date and time manually as you specify it.
From time server
Sets the local time using the Network Time Protocol (NTP) automatically.
Time/Date
This field species Date and Time information. You can change date and time by
changing parameters.
Time Protocol
Specify time protocol. Currently only NTP is supported.
Time Server Address
Enter the Hostname or IP address of the NTP server.
Automatically
synchronize NTP
Setup automatic synchronization with time server.
Update time every
Time interval for automatic synchronization.
Time Zone
Select your time zone.
Save
Click
Save
button to save your changes back to the GWR Router.
Reload
Click
Reload
to discard any changes and reload previous settings.
Table 26 – Date/time parameters
Maintenance
– Diagnostics
The GWR Router provide built–it tool, which is used for troubleshooting network problems. The
ping test bounces a packet of machine on the Internet back to the sender. This test shows if the GWR Router
is able to connect the remote host. If users on the LAN are having problems accessing service on the
Internet, try to ping the DNS server or other machine on network.
Click
Diagnostic
tab to provide basic diagnostic tool for testing network connectivity. Insert valid IP
address in
Hostname
box and click
Ping
. Every time you click
Ping
router sends four ICMP packets to
