Gendex VisualiX eHD, User And Service Manual

Page: 7 / 37

Gendex VisualiX
TM
eHD
4
User and Service Manual Doc #4519 986 19041 - April 2005
5
User and Service Manual Doc #4519 986 19041 - April 2005
Safety procedures
The device must be installed and used in accordance with the safety regulations and
instructions for use supplied in this User and Service Manual, for the purposes and ap-
plications for which it is intended.
Modifications and/or additions to the device must be made exclusively by Gendex
personnel or by parties expressly authorized for the purpose by Gendex. Any modifica-
tions or additions must always comply with standards and generally recognised rules
of good workmanship.
It is up to the user to ensure compliance with all local safety regulations in effect in the
place of installation.
Electrical safety:
The covers on the device may be removed only by qualified, authorised technical
personnel.
The product must be used only in rooms or areas which comply with all laws and
regulations applicable to electrical safety in medical premises, such as CEI standards
regarding use of an additional ground terminal for equipotential connections. This
device must always be disconnected from the power supply before cleaning or
disinfection.
Water and other liquids must not be permitted to penetrate inside the device, where
they could cause short circuit or corrosion. No protection is supplied against liquid
penetration.
The conformity with the IEC standard 601.1.1 and the validity of the CE mark apply
only if the computer is located out of the patient’s reach (at a distance of least 1.5 m
from the patient) and if the computer complies with the IEC 60950 standard.
2