manualshive.com logo in svg

Gendex DenOptix QST, Operator'S And Service Manual

Share
Download
Gendex DenOptix QST Operator'S And Service Manual Download Page 46

44

User and Service Manual

Doc # M010-004WWE July 2005

Scanner maintenance

The only part of the DenOptix QST scanner that may require operator maintenance is the fuse.

If you experience any other service-related problem, contact your local Gendex dealer. Follow

these directions to change the fuse.

Figure 7-5

Turn the DenOptix QST scanner off as per

Section 5.7. Unplug the power cord and USB 2.0

cable.

WARNING: To avoid possible electrical shock,

ensure that the power cord is unplugged.

Figure 7-6

Insert a small, flat tipped screwdriver into the

top of the fuse cover on the back of the scanner.

Pry the top of the connector open.

Figure 7-7

Remove the fuse holder. Change both fuses.

Ensure that new fuses meet the following spec-

ifications: 250 V, 2 amp, Time Lag, High Breaking

Capacity. Insert the fuses, REF 5101-0005, into

the fuse holder.

7.2

Operator maintenance

Gendex DenOptix® QST

Summary of Contents for DenOptix QST





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands