LRAD
1950XL
GENASYS INC.
Manual Part No.:114931-00 rev. B
20
5.7 MP3 Control Unit LCD Display
The LCD display gives status and operating mode information to the user.
STATUS
FILE TYPE
REPEAT MODE
TIME ELAPSED
AUDIO FILE NAME
Figure 7: MP3 Player Display
Status:
The MP3 player status will read one of the following:
•
PLAY
–
The selected file is under playback and should be heard through the LRAD
depending on the LRAD’s volume setting
.
•
PAUSE
–
The selected file is paused and will resume playback when the pause/play
button is pressed from the point in the file at which it was paused.
•
STOP
–
The selected file is stopped and will resume playback when the pause/play
button is pressed from the beginning of the file.
•
ALERT
–
The LRAD Alert tone is being played and should be heard through the LRAD
depending on the LRAD’s volume setting
.
•
ERROR
–
The
MP3 player’s onboard memory is not formatted
.
File Type
:
The display will read “MP3”, “WAV” or “WMA”, depending on the recording format
of the digital media file selected.
Repeat Mode
:
The character “R” will be displayed here if the MP3 player is in rep
eat mode. In
repeat mode, the selected file will play to the end and then automatically play again from the
beginning in a continuous fashion until the stop button is pressed or until the player is taken
out of repeat mode and the file plays to completion.
Time Elapsed
:
Displays the current playback time of the selected file. This counter resets when
the file restarts in repeat mode.
Audio File Name
:
Displays the file name of the audio file selected. If the file name is too long to
fit in the width of the display, the file name will continuously scroll right to left.
