RPT-100
User Manual
Date
2017-08-03
Rev
2.1
Page
15
CONFIDENTIAL
Document Gen2Wave. All rights of reproduction and disclosure reserved.
3.6.
Operation Mode
Icon
Mode
Function
로컬
It is an independent mode that does not work with applications or
devices that support Bluetooth. In local mode, it checks whether
duplicated data is read. Up to 1000 new data can be stored in
internal memory.
Data process is shown as below:
LCD data display
Counter
New
Redundant
New
Redundant
RFID
√
√
Scanner
√
√
√
RSP
This mode is provided for interworking with applications and can
be connected via RSP )Reader Serial Protocol) command.
For detailed information, please refer to RSP Interface
Programmers Guide.
SPP
Connect Bluetooth-enabled devices (PC, tablet, mobile phone, etc.)
and transfer data with SPP profile.
[Note]
Only data transmission is supported.
HID
Transmit data by keyboard by connecting Bluetooth-enabled
device (PC, tablet, mobile phone, etc.) via Bluetooth..
Trigger mode is set to Continue or Auto mode, up to 1000 data is
checked for redundancy while continously readingi data. If the
operation is restarted after finishing the operation, the duplicate is
checked again from the beginning.
D100
If your PC does not support Bluetooth function, you can connect
the DOTD-100 (sold separately) to the PC and transfer data to PC
wirelessly. For detailed information, refer to
오류! 참조 원본을
찾을 수 없습니다.
.