Wireless Router User Guide
36
4.6 Wireless Station Configuration
This section applies to all Wireless stations wishing to use the Wireless Router's Access Point,
regardless of the operating system which is used on the client.
To use the Wireless Access Point in the Wireless Router, each Wireless Station must have
compatible settings, as follows:
Mode
The mode must be set to
Infrastructure
.
SSID (ESSID)
This must match the value used on the Wireless Router. The default
value is
wireless
Note! The SSID is case sensitive.
WEP
By default, WEP on the Wireless Router is
disabled
.
•
If WEP remains disabled on the Wireless Router, all stations must
have WEP disabled.
•
If WEP is enabled on the Wireless Router, each station must use the
same settings as the Wireless Router.
