background image

Installation Guide of the RFID IOT Access Point 

    V0.2 

 

Gemtek Technology Co., Ltd.

 

In Commercial Confidential 

 

8/8 

This  device  complies  with  Part  15  of  the  FCC  Rules.  Operation  is  subject  to  the 
following two conditions: (1) This device may not cause harmful interference, and (2) 
this  device  must  accept  any  interference  received,  including  interference  that  may 
cause undesired operation. 
 

IMPORTANT NOTE: 
Radiation Exposure Statement: 

This equipment complies with FCC radiation exposure limits set forth for an 
uncontrolled environment. This equipment should be installed and operated with 
minimum distance 

20cm

 between the radiator & your body. 

 

This transmitter must not be co-located or operating in conjunction with any other 
antenna or transmitter. 
 
Country Code selection feature to be disabled for products marketed to the 
US/CANADA. 
 

Professional installation instruction 

The product

 will be distributed through controlled distribution channel 

and installed 

by

 trained professional and will not be sold directly to the general public through 

retail store. 

 

1. Installation personal   

This product is designed for specific application and needs to be installed by a 
qualified personal who has RF and related rule knowledge. The general user 
shall not attempt to install or change the setting. 

 

2. Installation location   

The product shall be installed at a location where the radiating antenna can be 
kept

 20cm

 from nearby person in normal operation condition to meet 

regulatory RF exposure requirement. 

 

3. External antenna   

Use only the antennas which have been approved by the applicant. The 
non-approved antenna(s) may produce unwanted spurious or excessive RF 
transmitting power which may lead to the violation of FCC limit and is 
prohibited. 
 

4. Installation procedure   

Please refer to user’s manual for the detail. 
 

5. Warning   

Please carefully select the installation position and make sure that the final 
output power does not exceed the limit set force in relevant rules. The 
violation of the rule could lead to serious federal penalty. 

 
 

Summary of Contents for WAPS-232N*AS









Reviews: