Professional installation instruction
Please be advised that due to the unique function supplied by this product, th
e
device is
intended
for
use with our interactive entertainment software and licensed third-party only
.
The product
will be distributed through controlled distribution channel
and installed by
trained
professional and will not be sold directly to the general public through retail store.
1. Installation personal
This product is designed for specific application and needs to be installed by a
qualified personal who has RF and related rule knowledge. The general user shall
not attempt to install or change the setting.
2. Installation location
The product shall be installed at a location where the radiating antenna can be kept
23cm
from nearby person in normal operation condition to meet regulatory RF
exposure requirement.
3. External antenna
Use only the antennas which have been approved by
the applicant.
The non-
approved antenna(s) may produce unwanted spurious or excessive RF transmitting
power which may lead to the violation of
FCC/IC
limit and is prohibited.
4. Installation procedure
Please refer to user
’s manual for the detail.
5. Warning
Please carefully select the installation position and make sure that the final output
power does not exceed the limit set force in
relevant rules
. The violation of the rule
could lead to serious federal penalty.
Summary of Contents for WAPD-246ACN
Page 1: ...WAPD 246ACN LoRa Gateway User Manual Version 1 0 2...
Page 6: ...User can use GIOT GW UL to subscribe all the uplink data...
Page 7: ...LTE setting Power off and insert SIM card Power on and Enable LTE function via Admin GUI...
Page 8: ...After login go to WAN setting to enable LTE input PIN code if needed and press SAVE...
