for your Ethernet adapter and is shown as a series of numbers and letters.
The MAC address/Adapter Address is what you will use for MAC address cloning or MAC filtering.
The example in Figure E-3 shows the Ethernet adapter’s IP address as 192.168.1.100. Your
computer may
show something different.
Figure D-2: MAC Address/Adapter
Address
Figure D-1: IP Configuration Screen
Note:
The MAC address is also called the Adapter Address.
Windows 2000 or XP Instructions
1. Click
Start
and
Run
. In the
Open
field, enter
cmd
. Press the
Enter
key or click the
OK
button.
2. At the command prompt, enter
ipconfig /all
. Then press the
Enter
key.
3. Write down the Physical Address as shown on your computer screen (Figure E-3); it is the MAC
address for
your Ethernet adapter. This appears as a series of numbers and letters.
The MAC address/Physical Address is what you will use for MAC address cloning or MAC filtering.
The example in Figure E-3 shows the Ethernet adapter’s IP address as 192.168.1.100. Your
computer may
show something different.
Figure D-3: MAC Address/Physical Address
Note:
The MAC address is also called the Physical Address.
Appendix E: SNMP Functions
SNMP (Simple Network Management Protocol) is a widely-used network monitoring and control
protocol. Data is
passed from a SNMP agent, such as the VPN Router, to the workstation console used to oversee
the network. The
Router then returns information contained in a MIB (Management Information Base), which is a
data structure
that defines what is obtainable from the device and what can be controlled (turned off, on, etc.).
SNMP functions, such as statistics, configuration, and device information, are not available without
third-party
Management Software. The Router is compatible with all HP Openview compliant software.
Appendix F: Upgrading
Firmware
The Router's firmware is upgraded through the Web-Utility's Firmware Upgrade tab from the
Administration tab.
Follow these instructions:
1. Click the Browse button to find the firmware upgrade file that you downloaded from the Neo-
Meridian website and
then extracted.
2. Double-click the firmware file you downloaded and extracted. Click the Upgrade button, and
follow the
instructions there.
Figure F-1: Upgrade Firmware
