Simple Network Management Protocol (SNMP) is a popular network monitoring and management
protocol. To
enable SNMP, click
Enabled
. To disable SNMP, click
Disabled
.
• Identification. In the Contact field, enter contact information for the Router. In the Device Name
field, enter the
name of the Router. In the Location field, specify the area or location where the Router resides.
• Get Community. Enter the password that allows read-only access to the Router’s SNMP
information.
• Set Community. Enter the password that allows read/write access to the Router’s SNMP
information.
• SNMP Trusted Host. You can restrict access to the Router’s SNMP information by IP address.
Enter the IP
address in the SNMP Trusted Host field. If this field is left blank, then access is permitted from any
IP address.
Figure 6-40: Log
• SNMP Trap-Community. Enter the password required by the remote host computer that will
receive trap
messages or notices sent by the Router.
• SNMP Trap-Destination. Enter the IP address of the remote host computer that will receive the
trap
messages.
UPnP
UPnP allows Windows XP to automatically configure the Router for various Internet applications,
such as gaming
and videoconferencing. To enable UPnP, click
Enabled
.
• Allow User to make Configuration Changes. When enabled, this feature allows you to make
manual changes
while still using the UPnP feature.
• Allow users to disable Internet access. When enabled, this feature allows you to prohibit any and
all Internet
connections.
When finished making your changes on this tab, click the
Save Settings
button to save these
changes, or click
the
Cancel Changes
button to undo your changes.
Log
The Log tab, shown in Figure 6-40, provides you with a log of all incoming and outgoing URLs or
IP addresses for
your Internet connection.
Email Alert
To enable E-Mail Alert, click
Enabled
.
• E-Mail Address for General Logs. Enter the
E-Mail Address for General Logs
in the field.
• E-Mail Address for Alert Logs. Enter the
E-Mail Address for Alert Logs
in the field.
• Return E-Mail address. Enter the
address for the return E-Mail
.
• E-Mail Server IP Address. Enter the
IP Address of the E-Mail Server
in the fields.
Syslog Notification
To enable Syslog, click
Enabled
.
• Device Name. Enter the
Device Name
in the field.
• Syslog Server IP Address. Enter the I
P Address of the Syslog Server
.
• Syslog Priority. Select the
priority
from the drop-down list.
Notification Queue Length
• Log queue Length. Enter the
number
of entries in the log queue in the field.
• Log Time Threshold. Enter the
time
for the threshold in the field.
Alert Log
