Gemotech RemoDAQ-9X20 Series Page 8 User Manual Download

Page: 8 / 81

RemoDAQ-9X20 Series User’s Manual

and more. In addition, there are also Tx and Rx LEDs on the

Ethernet port, indicating data transfer and reception.

1.2.4

Communicating Isolation

High-speed transient suppressors isolate

RemoDAQ-9X20 Ethernet port from dangerous voltage up

to 1500VDC power spikes and avoid surge damage to
whole system.

1.2.5

Built-in real-time OS and watchdog timer

The microprocessor also includes a real-time OS and

watchdog timer. The real-time OS is available to handle

several tasks at the same time. The watchdog timer is

designed to automatically reset the microprocessor if the

system fails. This feature greatly reduces the level of

maintenance required and makes the RemoDAQ-9X20

Summary of Contents for RemoDAQ-9X20 Series


















































































Search results

Summary of Contents for RemoDAQ-9X20 Series

Reviews:

Related manuals for RemoDAQ-9X20 Series

Brands by name

Popular brands

Gemotech RemoDAQ-9X20 Series, User Manual

Search results

Summary of Contents for RemoDAQ-9X20 Series

Reviews:

Related manuals for RemoDAQ-9X20 Series

Brands by name

Popular brands