GemOro PRO-M 3 Manual Download Page 5

GEM

ORO PRO-M 3

8

9

3.   The sleek and ergonomic shape 

comfortably rests in and on your 
hand when held, and the tester 
has PATENTED intuitive finger 
grip pads for increased user-
friendliness and ease of use. 

4.   The LED illuminator is positioned 

under the probe tip. The LED 
Illuminator is a super bright 
UV LED that illuminates 
the stone being tested.

5.   The tester is equipped with a 

retractable probe tip designed to 
protect the probe tip if excessive 
force is used while testing or 
if it is accidentally dropped.   

6.   The tester housing is made from 

durable ABS and is covered 
with GemOro’s exclusive 
rubberized paint that provides 
an even greater grip.  

7.   Powered by (3) supplied 1.5V 

AAA NiMH rechargeable 
batteries and conveniently 
charged by a micro-USB adapter. 
The rechargeable batteries 
may be substituted with AAA 
alkaline batteries if a suitable 
power outlet is unavailable to 
recharge the NiMH batteries. 

8.   The tester is also designed 

to have its batteries charged 
with the optional GemOro 
UltraDock 3 charging station 
accessory (Item #0772).

9.   Includes a GemOro protective 

ballistic nylon carrying case, 
aluminum loose stone holder, 
GemOro Test Stone Cloth, as 
well as (3) user-replaceable 
AAA NiMH rechargeable 
batteries, a universal multi-
voltage 100V-240V AC 
adapter / charger cube with 
premium micro-USB cord. 

10. The tester is also designed to be 

used with the optional handy 
PATENTED GemOro Test Stone 
Magnifier attachment, which 
when clipped onto the tester’s 
tip area allows the user to 
more easily see and test small 
diamonds without accidentally 
touching the setting or prongs 
(Item #0780).

11.  The tester has an auto-off 

function to preserve the battery 
life and it will automatically 
turn itself off after a period of 
10 minutes of non-use. After 
powering down, if you wish to 
resume using the PRO-M 3, simply 
touch the tester’s power button 
and within seconds the tester 
will turn itself back on again.  

12. Glowing LED Light Pipe 

and Probe Tip Indicator.  
Innovative PATENTED colored 
LEDs visually indicate: 

BLUE

 = Moissanite 

A

RED

 = Metal Alert 

B

Summary of Contents for PRO-M 3














Reviews: