GemOro Superior Instruments
6
WHEN IT BECOMES NECESSARY
TO REFILL STEAMER TANK
• Turn the unit off by flipping the rear power switch to the “0” position.
• Unplug it from the power outlet.
•
Allow sufficient cooling time of approximately 30
minutes prior to refilling the tank. As a safety feature,
the water fill cap has been designed so that it cannot
be removed until its tank has sufficiently cooled.
• While maintaining an arm’s length distance from the appliance,
slowly unscrew the water fill cap. As you are unscrewing the
water fill cap the remaining pressure will release from around it.
Press down on the steam activation lever to more quickly release
the remaining steam in its tank. Remove the water fill cap.
• Lift the appliance up by holding both sides.
DO NOT LIFT
THE APPLIANCE BY THE STEAM ACTIVATION LEVER.
• Turn the appliance upside down over a sink to drain any
residual water that may be in the steamer tank. To more quickly
and fully drain the steamer tank, while holding the appliance
upside down, press down on the steam activation lever.
• Follow the instructions 1-6 on the Quick Reference
Guide above to refill the BrilliantSpa PRO.
COMPLETE OPERATING INSTRUCTIONS –
STEPS 1 THROUGH 12
(WARNING: DO NOT PLUG
IN OR TURN ON UNTIL YOU REACH STEP 5)
1. Place the BrilliantSpa PRO upright on your counter.
2. With the steamer unplugged and sufficiently cool, carefully
unscrew the water fill cap and then remove it. Place the
funnel in the opening where the fill cap was located.
3. Fill the combination water residue collection and fill cup with
regular tap water to the MAX FILL LINE and slowly pour it into the
steamers funnel. Repeat this a second time so that a total of two
cups of water have been added.
IF USED PREVIOUSLY, before
refilling it be sure to remove any remaining water in its tank
by turning it upside down over a sink or you may accidentally
overfill the tank. IF YOU OVERFILL THE TANK, it will not have
enough room to create pressurized steam and will sputter
