OPERATION
:
-
Check the specification label located on back of this equipment.
-
Plug cord in a properly grounded outlet.
-
Place the test tubes into the tube adaptors. Be sure to place the
tubes diagonally and symmetrically to keep the rotor balanced.
-
Close the cover completely. NOTE, Locking latch is optional.
-
Dial preset your desired time by turning the control knob for any
spin interval from 0
– 60 minutes. This equipment is working by
timer-activated operation.
-
When turn clockwise the timer, the pilot lamp will light up at the
same time, which indicates the power up.
-
Adjust the control knob of speed regulator to bring speed to your
desired operation speed and centrifugal force.
-
This centrifuge does not include the speed indicator, the reference
of speed and RCF is depicted below. Nevertheless, the user is
recommended to measure the speed by a hand held LCD
tachometer in order to achieve a correct speed and RCF.
-
Speed and RCF varies slightly centrifuge to centrifuge.
-
The bell rings and power will shut out automatically when the set
time has elapsed and the pilot lamp will distinguish simultaneously.
WARNING
：
-
Do not open the lid only until the rotor has stopped completely.
-
Do not stop the rotor by hand. There is possibility of personal injury.
-
Gemmy
will not ensure the responsibility if user violate the above
regulation.
6
