Hardware Configuration
2.5
JP2-DISCHARGE CMOS SETUP
The CMOS Setup can be erased by shorting the jumper JP2 as below. Refer to
Fig 2 for the location of JP2.
JP2 -- Discharge CMOS Setup
2.6
JP10-SOURCE OF GA20
The source of GA20 can be selected by JP10, when emulation fast gate A20 is
selected, the system performance may optimize under Multi-user operation
system. Refer to Fig 2 for the location of JP10. Set the jumper as below.
JP10 -- Select Source of GA20
Table 5
Summary of Contents for GMB-486UN
Page 1: ...GMB 486UN 80486 Mainboard User s Guide Version 3 00...
Page 12: ...Hardware Configuration...
Page 15: ...Chapter 2 Table 4...
Page 17: ...Chapter 2 Table 6...
