Page 5
9. CUE SECTION: By connecting a set of headphones to the
HEADPHONE (28)
jack, you can monitor any or all of the channels.
Press the
CUE ASSIGN (18)
buttons for channels 1 - 4 to select the
channel or channels to be monitored and their respective LED
indicators will glow. Use the
CUE LEVEL (24)
control to adjust the
cue volume without effecting the overall mix. By moving the
CUE
PGM PAN (22)
control to the left you will be able to monitor the
assigned cue signal. Moving the control to the right will monitor the
PGM (program) output. Rotating to the right will monitor the PGM
(program) output.
10. DISPLAY: The
DISPLAY (19)
indicates the
MASTER
output left and
right levels.
Specifications
INPUTS:
DJ Mic....................................................1.5mV 2Kohm balanced
Phono.........................................................................3mV 47Kohm
Line.......................................................................150 mV 27Kohm
OUTPUTS:
Amp/Booth......................................................0 dB 1V 400ohm
Max..............................20V Peak to Peak
Rec...........................................................................225mV 5Kohm
MIC:
DJ Mic....................................................1.5mV 2Kohm balanced
Bass......................................................................................± 12dB
High.......................................................................................± 12dB
GENERAL:
Frequency Response....................................20Hz - 20KHz +/- 2dB
Distortion................................................................................0.02%
S/N Ratio...............................................................better than 80dB
Talkover Attenuation..............................................................-16dB
Headphone Impedance.........................................................16ohm
Power Source.............................................115/230V 50/60Hz 10W
Dimensions..........................................................19”w x 4”h x 9”d
Weight........................................................................10.17 lbs
002-204
021-993
032-017
021-762
022-322
022-305
023-674
002-531
002-532
002-703
002-704
003-102
003-110
148-236
148-239
003-970
003-969
003-564
049-206
159-167
159-216
159-171
146-710
102-007
102-025
110-172A
111-043A
111-044A
111-046A
111-049A
111-050
111-051A
111-053A
131-081
PANEL CONTROL
PANEL REAR
COVER BOTTOM
BRACKET VR
HOLDER X-FADER
PROTECTOR PLATE FOR 115/230V SWITCH
SWING LEVEL
KNOB PUSH (SMALL)
BUSHING FOR KNOB (SMALL)
KNOB SLIDE (SMALL)
KNOB SLIDE (BIG)
KNOB ROTARY (ASSIGN)
KNOB ROTARY (B)
KNOB INLAY (BLACK); LEVEL,BALANCE,CUE
KNOB INLAY (GRAY); TREBLE,BASS
TRIM VR
HOLDER LED 3f LED(17mm)
WASHER XLR
PAD FOOT
DUST PROOF CLOTH (VR)
DUST PROOF CLOTH (KNOB-SWING)
DUST PROOF CLOTH (VR)
GND SCREW
PAN-HEAD MACHINE SCREW; PMS 2X4(B)
PAN-HEAD MACHINE SCREW; PMS 2.6X4(B)
BAND-HEAD TAPPING SCREW/TWIN SCREW;
BTS-2 3X8(AB) TWIN
FLAT-HEAD TAPPING SCREW; FTS-3 3X6(AB)
BAND-HEAD TAPPING SCREW; BTS-3 3X10(AB)
BAND-HEAD TAPPING SCREW; BTS-3 3X6(AB)
FLAT-HEAD TAPPING SCREW; FTS-3 3X12(AB)
FLAT-HEAD TAPPING SCREW; FTS-3 3X12(Y)
BAND-HEAD TAPPING SCREW; BTS-3 3X5(AB)
BAND-HEAD TAPPING SCREW/TW-E; BTS-3/
TW-E 3X6(AB)
NUT/WASHER 3mm
Description
Part #
Cabinet Parts and Packing
1
2
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
Item #
Parts Lists
262-039
262-040
262-041
262-042
262-043
PRINTED CIRCUIT BOARD PDM10-1:
SWITCH (V0 12×146)
PRINTED CIRCUIT BOARD PDM10-2:
MAIN
PRINTED CIRCUIT BOARD PDM10-3:
MASTER VR
PRINTED CIRCUIT BOARD PDM10-4:
FADER (V0 73.5×13)
PRINTED CIRCUIT BOARD PDM10-5:
PHONES (V0 14.5×27)
Description
Part #
Printed Circuit Boards
Item #
1
2
3
4
5
