7.0 - ALARM UNIT SEALING
6.0 - SIM CARD
DISCONNECT the alarm unit before carrying out the following operations.
PRESS THE YELLOW BUTTON
ON THE SIDE OF THE SIM CARD
DRIVE TRAY
PULL OUT THE SIM CARD
DRIVE TRAY AND INSERT
THE SIM CARD
RE-INSERT
TRAY AND MAKE SURE IT IS
THE DRIVE
SECURELY INSERTED
IN THE APPROPRIATE POSITION.
WARNING
!
To seal the alarm, position the
rubber cap over the external edge of
the alarm housing as shown below.
Pull the plastic rectangular flange
over the rubber cap and secure with
the supplied screws.
Do not over tighten the screws.
Alarm unit sealed
PAGE 6
PAGE 7
