background image

                                                                                                                                                         

- 4 - 

Preface                                                                                                                           

 

Test Shots Prior to Photography   

Always take a test photograph to check that the camera is functioning normally. 
The liability for any incidental losses (such as the cost of photography or the 
loss of income from photography) incurred as a result of fault with this product 
cannot be accepted. 

Notes on Copyright 

Images recorded using your digital camera system cannot be used in ways 
that infringe copyright laws without the consent of the owner unless intended 
only for personal use. Note that some restrictions apply to photographing stage 
performances, entertainment and exhibits, even when intended purely for 
personal use. Users are also asked to note that the transfer of memory cards 
containing images or data protected under copyright laws is only permissible 
within the restrictions imposed by those copyright laws. 

Liquid Crystal   

If the LCD monitor or LCD panel is damaged, take particular care with the 
liquid crystal in the monitor or panel. If any of the following situations arise, 
take the action indicated.   

• 

If the liquid crystal comes in contact with your skin wipe the area with a 
cloth and then thoroughly wash with water and soap. 

• 

If the liquid crystal gets into your eyes flush the eye with clean water for at 
least 15 minutes and then seek medical assistance. 

• 

If liquid crystal is swallowed flush your mouth thoroughly with water. Drink 
large quantities of water and induce vomiting. Seek medical assistance. 

 

Notes on Electrical Interference 

If the camera is used in hospital or aircrafts, please note that it may cause 
interference with other equipment in the hospital or aircraft. 
For details, please check with the applicable regulation in that area. 

 

Trademark Information 

MS-DOS and Windows are registered trademarks of the Microsoft Corporation 
registered in the USA and other countries. 
Windows is an abbreviated term referring to the Microsoft Windows Operation 
System. 
Other company or product names are trademarks or registered trademarks of 
their respective companies. 
 
 
 
 
 
 
 
 

Summary of Contents for J44416
























Reviews: