- 22 -
W A R N I NG
♦
Use only the batteries specified with this camera.
Load the batteries with the poles positioned as indicated by the
⊕
and
Θ
marks. The use of other power sources can damage the camera and
cause a fire accident.
♦
When a fault arises, switch the camera off and remove the
batteries/remove the camera from USB connection.
Turn off the camera and remove batteries/remove the camera from
USB connection immediately when the camera becomes very warm,
emitting smoke, emitting unusual odor or in any other abnormal states.
Continue use of the camera in these situations may cause a fire or electric
shock.
♦
Do not cover or wrap the camera
This can cause heat to build up and distort the casing or cause a fire.
♦
If the battery leaks and fluid gets into our eyes or comes into
contact with your skin or clothing, this can cause injury or loss of
eyesight. Immediately flush the affected area thoroughly with clean
water and seek medical treatment.
♦
When discarding or storing batteries, cover the battery terminals
with insulation tape.
Contact with other metallic objects or batteries could cause the
batteries to ignite or burst.
♦
Do not heat, modify or attempt to disassemble the batteries.
♦
Do not drop or subject the batteries to impacts.
♦
Do not attempt to recharge lithium or alkaline batteries.
♦
Do not store the batteries with metallic products
Any of these actions can cause the batteries to burst or leak and
cause fire or injury as a result.
♦
Do not allow water or foreign objects to enter
the camera
If water or a foreign object has entered the camera, switch the
camera off and then remove the batteries/remove the camera from USB
connection. Continued use of the camera can cause a fire or electric
shock.
♦
Never attempt to modify or disassemble the camera. (Never
open the casing)
♦
Do not use the camera when it has been dropped or the casing is
damaged.
This may cause a fire or electric shock
