L
NAPCO Security Systems
X
GEM-P3200 Programming Instructions
WI818D 8/00
!
Page 15
Local System or C.S. Reporting System
(Appears for New Panel Only)
Press YES (
E
) button for all zones to report; press NO (
F
) button
for no zones to report (LOCAL SYSTEM).
Exit/Entry Zones
(Appears for New Panel Only)
Directly enter the zone numbers which are to be used as Exit/Entry zones.
Valid entries are from 01 to 48. Directly enter each zone number, including
leading zeros. Use number buttons
1
through
9
.
NOTE:
Press
the
0
button for a zero. Press
J
to save and then repeat for any
additional zone(s). Press NEXT (
E
) button to proceed.
NOTE:
Exit/Entry Zones will have an entry delay of 30 seconds and an exit
delay of 60 seconds. Chime will automatically be programmed for all E/E
zones. If you are programming a 2 Area system, enter all of the zones
required for Areas 1 & 2.
Interior Zones
(Appears for New Panel Only)
Directly enter the zone numbers which are to be used as Interior Zones.
Valid entries are from 01 to 48. Directly enter each zone number, including
leading zeros. Use number buttons
1
through
9
.
NOTE:
Press
the
0
button for a zero. Press
J
to save and then repeat for any
additional zone(s). Press NEXT (
E
) button to proceed.
NOTE:
All Interior zones will also be automatically programmed as “Exit/
Entry Follower” zones. If you are programming a 2 Area system, enter all
the zones required for Areas 1 & 2.
Number of Keypads in Area 1
Directly enter the total number of Keypads to be installed in Area 1. Valid
entries are from 01 to 07. Directly enter the number of keypads, including
leading zeros. Use number buttons
1
through
9
.
NOTE:
Press
the
0
button for a zero. Press
J
to save . Press NEXT (
E
) button
to proceed.
Number of Keypads in Area 2
Directly enter the total number of Keypads to be installed in Area 2. Valid
entries are from 01 to 07. Directly enter the number of keypads, including
leading zeros. Use number buttons
1
through
9
.
NOTE:
Press
the
0
button for a zero. Press
J
to save . Press NEXT (
E
) button
to proceed.
(Press YES or NO)
REPORT
ALL ZN?
Y/N
(Direct Entry)
ENT EE
ZN# 00
(Direct Entry)
ENTFOL
ZN# 00
ENT A1
#KP 01
(Direct Entry)
ENT A2
#KP 00
GEM-RP2ASe2
Ke
yp
ad
: CS Re
por
ting, Exit/
E
nt
ry
Zones, Interior Z
one
s & Ke
yp
ad
s pe
r Ar
ea