manualshive.com logo in svg

Gemini 516MHW, User Manual, Page: 2 / 9

Share
Download
Gemini 516MHW User Manual Download Page 2

 

 

Designed

 

and

 

manufactured

 

by

 

GEMINI

 

TECHNOLOGIES

 

srl

 ‐  

Via

 

L.

 

Galvani,

 

12

 

–

 

21020

 

Bodio

 

Lomnago

 

(VA)

 

–

 

Italy

 

Tel.

 

+39

 

0332

 

943211

 

–

 

Fax

 

+39

 

0332

 

948080

 

–

 

www.gemini

‐

alarm.com

 

ISO

 

9001

 

CERTIFIED

 

COMPANY

 

 

Rev.01

 

07/2018

 

 

 

2/9 

 
 
 

 

 
 
 

 
 

 

 
 

 
 

 

 
 

 

 

 

 

 

 
 

 
 

 

 
 

Ø 18-20mm

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sensors and adapters can be spray painted before assembly to match the color of the vehicle (optional). To spray paint proceed as follows: 

 

1.

 

Use isopropyl alcohol to clean the sensors and the adapters and let dry. Avoid touching the cleaned surfaces. 

2.

 

Insert the selected adapters in the supplied cardboard template: 

 

Inner adapters fully insert into the cardboard template slots from the top side. 

 

Outer adapters => press halfway down the slots, up to the side tabs, from the top side. 

 

3.

 

 The sensors must be inserted in the slots from underneath the cardboard. For a perfect spray-paint finish, we recommend turning down the black silicone seal 
around the sensor head before inserting the sensor into the slots (paint might not adhere to the silicone). 

  

                   

       

 

4.

 

Fold the cardbox template into a box. Spray paint the sensors and the adapters and let dry thoroughly before assembling.   

          NB: Too much spray paint can impair the sensors performance. 

 
 

6x

 sensors 

1x 

acoustic warning 

buzzer for programming 

complete with wiring 

1x 

resin filled control unit 

complete with wiring 

    

8x

 cable clips 

16x

 zip-ties 

6x

 10° angled 

external adapters 

6x

 standard external 

adapters 

6x

 10°angled inner 

adapters 

6x

 standard inner 

adapters 

12x

 

adhesive pads

 

3.0 – KIT CONTENTS

 

 

4.0 - TOOLS 

 

5.0 - SPRAY PAINT - SENSOR HEADS AND ADAPTERS 

2x

 2-meter 

extension cables  

Summary of Contents for 516MHW










Reviews:

No comments