USB 5.1 surround
headset
Important
Before installing Xear 3D audio, plug in the USB 5.1 Headset first. Always use the same
USB PC connector for the USB 5.1 Headset to automatically start the Xear 3D software
when the headset is plugged in.
Software installation
1.
Turn on the PC system and connect the USB 5.1 Headset to a USB connector.
2.
Insert the installation CD into your CD drive. If auto run is activated, the setup
program will start up automatically. Otherwise, start the setup program “
setup.exe
”
from the CD drive by hand.