GEMAŞ Genel Mühendislik Mekanik San.veTic.A.Ş.
İTOB Organize Sanayi Bölgesi 10001 Sok.No:28 Menderes/İZMİR TURKEY
Tel:0232 799 0 333 Fax:0232 799 0 330 www.gemas.com.tr [email protected]
8
EN
GEMAŞ PURITRON GSC Installation and User Manual
V4.1
2.3.Pool Water
It is recommended to use mains water for the pool. If you are sourcing water from other sources, please
have the water analyzed and make sure it is free of high concentrations of metals and calcium that are
unsuitable for system operation. Also check the water's compliance with human health standards.
Before starting the salt water chlorinator , adjust the pool water values and take 1 kg of chlorine stabilizer for
25 m3 of water (20-30 ppm or as specified by the stabilizer manufacturer)
The stabilizer prevents the loss of chlorine from UV rays. The lack of stabilizer forces it to
produce more chlorine, which shortens the life of the cell. On the other hand, a high
stabilizer also affects the disinfection feature of chlorine in a way that will decrease.
The water of the pool should meet the following values.
Salt
5 – 6 Kg/m³
pH
Concrete Pool
7.2 – 7.6
Polyester
6.8 – 7.0
TAC
60 – 100 ppm
TH
15 – 20 French
Stabilizer
20 - 30 ppm (or manufacturer's recommendation)
Temperature
>10°C
2.4. Adding Salt
•
During the salt addition process, the system should be completely shut down until all of the salt is
dissolved. If the system is operated before the salt is completely dissolved, the cell can be irreversibly
damaged. Any damage caused by this reason causes the product to be out of warranty.
•
Calculate the water volume of the pool, salt should be added to a salt concentration of 5-6 kg per square
meter. Make sure the salt water chlorinator, is not connected during this process and do not operate the
24-hour filtration system.
•
In a newly coated pool, wait until 4 weeks after coating without salt.
•
The dissolution rate of salt can be accelerated by using a pool broom. Make sure the salt concentration is
5-6 kg / m3.
•
Salt water chlorinator, has no salt consumption, but its concentration may drop due to rain and water
supplements.
In cases where you need to add salt, pour the salt as close to the return line as possible.
Never pour it into skimmers or suction strainers.
