Gemalto Cinterion ENS22-E, At Command Set, Page: 122 / 189

Cinterion
®
ENS22-E AT Command Set
7.13 Internet Service URC "^SIS"

ENS22-E_ATC_V01.000 19/02/11
Page 122 of 189
7.13.1 Information Elements Related to the Service Application
The following table lists the informatiomation elements which may be returned by all supported services within
the "
^SIS
" URC and the command response of
AT^SISE
. It should be noted that TCP/IP socket problems may
occur in all Internet service connections (Socket or Transparent UDP).
<urcInfoId> <urcInfoText>
Description
Information Elements Returned by the TCP/IP socket
2 Invalid socket descriptor Socket error
3 Bad address specified Socket error
4 Invalid operation Socket error
5 No free socket descriptors Socket error
6 The operation would block Socket error
7 A previous attempt at this operation is still ongoing Socket error
8 Socket is not bound Socket error
11 Operation not supported Socket error
12 The address is already in use Socket error
13 The network is unavailable Socket error
14 An established connection was aborted (transmission
time-out or protocol error)
Socket error
15 Remote host has reset the connection Socket error
16 No buffer space available Socket error
17 The socket is already connected Socket error
18 For TCP/IP sockets, the socket is not connected Socket error
20 Connection timed out Socket error
22 Remote host is unreachable Socket error
23 An unexpected error occurred Socket error
27 The port is already in use Socket error
General Information Elements
48 Remote peer has closed the connection Remote peer has closed the
connection unexpectedly, and
no data are available. The host
shall close the service.
Note that the "
^SIS
" URC only
indicates the
<urcInfoId>
,
but the
AT^SISE
command
indicates both the
<urcIn-
foId>
and the
<urcInfo-
Text>
.
49 Fatal: No memory is available for service action
56 Syntax error in URL
62 DTLS unexpected Error DTLS error
63 DTLS bad parameter DTLS error
64 DTLS OS Error DTLS error
65 DTLS timer Error DTLS error