Gemalto Cinterion EMS31, User Manual

Page: 7 / 17

Getting Started with Cinterion
®
EMS31
2 Getting Started with EMS31
11

EMS31_startup_guide_v01b 2017-10-19
Confidential / Released
Page 7 of 17
2 Getting Started with EMS31
2.1 Technical Requirements for Using EMS31 Modules
• EMS31 evaluation module. For EMS31 evaluation module schematics see Appendix: Cir-
cuit Diagrams for Evaluation Module Board
• Computer running Windows 7, USB 2.0 High Speed compatible
• Local administrator privileges on the particular Windows computer to install and uninstall
the drivers
• DSB75 Development Support Board (for details see [3] )
• AH6-DSB75 Adapter required for mounting the evaluation module to the DSB75. For more
information about the AH6-DSB75 Adapter please refer to
Appendix: AH6-DSB75 Adapter .
• Accessories:
- 50 Ohms antenna adapter cables with SMT connectors to connect the U.FL connectors
on the EMS31 evaluation module to the U.FL connectors on AH6-DSB75 Adapter (e.g.
a Hirose - Hirose cable such as delivered with each DSB75) - 1 for the main antenna
(RF_OUT).
- External 50 Ohms RF antenna with SMA connector to connect the SMA connectors on
the AH6-DSB75 Adapter (e.g. a SMARTEQ MiniMag antenna such as delivered with
each DSB75)
- 9 to 15 Volts power supply applied at the DSB75 for powering up the DSB75 and the con-
nected EMS31 evaluation module (not supplied by Gemalto M2M)
- RS-232/USB converters and USB cables or Serial-to-USB cables for the module's asyn-
chronous serial interfaces ASC0 and ASC1 (not supplied by Gemalto M2M).
• Appropriate application for controlling the module from within a PC’s operating system. For
Windows, e.g. Windows Hyperterminal, PuTTy.