manualshive.com logo in svg

Gemalto CINTERION BGS2T, At Command Set

The Gemalto CINTERION BGS2T is a cutting-edge GSM/GPRS wireless module. Our comprehensive user manual, complete with an extensive AT Command Set, is available for free download on our website. Discover the full potential of this product by accessing the manual at manualshive.com.

Share
Download
background image

BGS2T AT Command Set  

3.3 AT^SIND

BGS2T_ATC_V01.301

Page 71 of 554

1/31/12

 

c

However, be aware that this Elementary File data can be changed at any time 
by the network provider or an application running on the SIM. For details refer 
to 

SAT

 feature "Data Download to SIM" in 3GPP TS 11.14 

[15]

. If this happens 

the TE urgently needs to refresh its internal representation (i.e. copy) of the 
changed data to ensure its safe and consistent use! 
Therefore, a "

+CIEV

: "simdata"" URC is issued if ME is in 

Remote-SAT

 Auto-

response mode (

AT^SSTA

) and the SIM sent a 

SAT

 REFRESH command indi-

cating that the content of one or more Elementary Files has been changed. 

“simtray“

Indication of SIM tray status as indicated by CCIN line. Result does not depend 
on whether the tray holds a SIM or not. 
Generating a URC on status change is not supported. 

“vmwait1“

Voice Message Waiting Indication for line 1

"vmwait1" and "vmwait2" indicate the receipt of a special short message with 
a Voice Message Waiting Indicator. The service must be provisioned by the 
operator. 
The numbers 1 or 2 in "vmwait1" and "vmwait2" are related to the two lines of 
the Alternate Line Service (ALS), also defined in CPHS Phase 2 standard. For 
further details refer to the 

AT^SALS

 command. 

The presentation mode of the indicator varies with the operator: If more than 
one message are waiting, some operators only indicate the first one, others 
deliver the indicator each time a new voice message is put into the mailbox. 
After the subscriber has retrieved all voice messages the service center auto-
matically sends another message indication which provides the value 0. 
Some operators may also send the number of waiting voice messages along 
with the indication. In this case, the number will be displayed by the ME as part 
of the URC. For example, "+CIEV: vmwait1,1,5" notifies that five new voice 
messages are waiting. However, it should be noted that neither the read com-
mand 

AT^SIND

? nor the write command 

AT^SIND

=

<mode>

,2 display the 

number of waiting messages. 
The "vmwait" indicators do not apply if a network provider signals new voice 
mail(s) via standard SMS. In this case the indicator "message" will be displayed 
(see 

AT+CIND

). 

“vmwait2“

Voice Message Waiting Indication for line 2

“ciphcall“

Ciphering Status Change Indication 

As stated in GSM specifications 02.07 and 02.09 the ciphering indicator feature 
allows the ME to detect that ciphering is not switched on and to indicate this to 
the user. 
The ciphering indicator feature may be disabled by the home network operator 
setting data in the "administrative data" field (EF

AD

) in the SIM, as defined in 

3GPP TS 11.11 

[14]

. 

If this feature is not disabled by the SIM, then whenever a connection is in 
place, which is, or becomes unenciphered, an indication shall be given to the 
user. This enables the user's decision how to proceed. 
Read command returns valid ciphering status only if a call is in progress or 
active. 
If EF

AD

 setting disables the ciphering indicator feature read command always 

indicates a ciphered link and no URC presentaion will take place. 
The following restrictions apply if the same serial channel is used for 

AT^SIND

 

0

SIM tray empty.

1

SIM tray plugged in. 

0

The value 0 notifies that no new voice message is available, and is pro-
vided by the service center to clear the voice message indication after 
the subscriber has retrieved all voice messages. 

1

The value 1 notifies the subscriber that the mailbox contains one or 
several messages. 

0

See description of "vmwait1". 

1

See description of "vmwait1". 

0

Current call or SMS is not ciphered.

1

Current call or SMS is ciphered.

Confidential / Released

Summary of Contents for CINTERION BGS2T











































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CINTERION BGS2T

Vectron POS Mini II User Manual preview
POS Mini II
Brand: Vectron Pages: 110
Hytera TETRA PT580H F5 Manual preview
TETRA PT580H F5
Brand: Hytera Pages: 33
Vertex Wireless VW450 User Manual preview
VW450
Brand: Vertex Wireless Pages: 35
Moneris iCT250 User Manual preview
iCT250
Brand: Moneris Pages: 36
CPI SYNQ Manual preview
SYNQ
Brand: CPI Pages: 10
SHIFT4 Harbortouch iPP320 Quick Reference Manual preview
Harbortouch iPP320
Brand: SHIFT4 Pages: 13
Pax Technology PRIORITY A920 Reference Manual preview
PRIORITY A920
Brand: Pax Technology Pages: 59
Omron NP Series Introduction Manual preview
NP Series
Brand: Omron Pages: 100
POSIFLEX MT-4210A/H User Manual preview
MT-4210A/H
Brand: POSIFLEX Pages: 16
POSIFLEX KS-7415 User Manual preview
KS-7415
Brand: POSIFLEX Pages: 20
Opticon H-13 Quick Start Manual preview
H-13
Brand: Opticon Pages: 4
Tailwind Verifone VX 520 PEDPack Quick Installation Manual preview
Verifone VX 520 PEDPack
Brand: Tailwind Pages: 2
Valor VP500 Quick Reference Manual preview
VP500
Brand: Valor Pages: 4
Sagem EFT930 Installation Manual preview
EFT930
Brand: Sagem Pages: 46
innowi ChecOut M Quick Start Manual preview
ChecOut M
Brand: innowi Pages: 2
NCR Retrofit OPTIC 5 Touch Installation Instructions Manual preview
Retrofit OPTIC 5 Touch
Brand: NCR Pages: 54
barclaycard Countertop Full User Manual preview
Countertop
Brand: barclaycard Pages: 34
PIONEERPOS StealthKiosk Specifications preview
StealthKiosk
Brand: PIONEERPOS Pages: 1

Brands by name

Popular brands

Load more brands