Document Reader AT9000 MK2 User Guide
Installing the Reader
Page 17 of 33
Install the software
The reader package contains an instruction sheet with links to a customer portal to download the software
components and documentation necessary to install and operate the reader:
Gemalto demonstration programs and SDK
Reader and software documentation
Required drivers
Additional SDKs based on the reader model
To install the reader software:
1. Download the latest SDK software from the link. Click on the
Gemalto Document Reader SDK x.x.x
Setup.
exe link and save the exe file to a known location on the PC (for example, the desktop).
2. Run the downloaded .exe file and follow the on-screen instructions.
Connect the reader cables
Note:
Make sure you install the software before connecting the reader.
To install the reader, you need to connect the following cables:
USB cable
– The reader is supplied with a USB 2.0 cable (Type A to Type B). The cable provides
both power and data connectivity to the reader.
Type B (connects to reader)
Type A (connects to PC)
Power supply (optional)
–
You need to use the optional PSU if you want to use the reader as
a powered USB2.0 hub.
The Power connector is a latching type that cannot accidentally detach
as the reader is moved about. To remove the connector, grasp the connector shell and pull away
from the reader. The connector shell will slide backward slightly, allowing the connector to
disengage from the reader.
To connect the reader cables:
Note:
Use on the USB cable and optional PSU provided with the reader.
Modifications or changes to the Product, the interface cables or the power
supply not expressly approved by the manufacturer could void the User's
authority to operate the Product and/or break local laws or regulations.
