Rev. 00 02/17
24
Maintenance / Repairs
PS07
ATTENTION
Damage to sieve mesh
The fine-meshed sieve may be damaged during cleaning with an
overly strong jet of compressed air.
► Do not use compressed air for cleaning!
► Never scratch!
10. Reassemble the parts.
ATTENTION
Incorrectly assembled parts may cause malfunctions or defects
► The assembly takes place in reverse order!
Dirt removal
To ensure that the powder is sufficiently clean, you should check the
screen for cleanliness and clean if necessary every day before starting
work and at shift change.
Daily cleaning of the sieve
1.
Switch off the plant on the main control cabinet.
– The vibration motor and powder feed are only halted for a short
time.
2.
Loosen the clamping ring.
3.
Remove the sieve cover and clean with an industrial vacuum
cleaner.
4.
Remove dirt deposits on the sieve with an industrial vacuum cleaner
– Check the sieve for damage
5.
In the event of severe soiling, remove the sieve and clean thoroughly
with an industrial vacuum cleaner.
Interval
Daily maintenance
–
Clean the exterior of the sieve machine with a dry cloth
–
Remove dirt from the screen. See chapter "Dirt removal" on page
24.
–
Check hose connections.
Repairing the sieve mesh
Small holes can be filled with adhesive (e.g. Araldit).
Let the adhesive harden before to reinsert the sieve!
Summary of Contents for PS07
