V
02/16
OptiMove CR08
Design and function
•
13
Design and function
Structure
The OptiMove CR08 Axis control unit is available as an enclosure version
for building into an AS0x control system.
Function description
The OptiMove CR08 axis control unit is used in axis control systems. A
complete axis control system consists of an OptiMove control unit, a
servo regulator and an axis with synchronous motor. The servo regulator
receives the supply voltage and the control signals directly from the
OptiMove axis control unit.
The OptiMove CR08 axis control unit contains the visualization, input unit
and sequence control for the control of an axis with synchronous motor
and position regulator.
The drive motor is equipped with an electrical retaining brake. The holding
brake is activated if the axis control is disconnected from mains.
