Gema OptiFlex Pro F, Operating Instructions And Spare Parts List

Page: 35 / 60

Rev. 00 03/19
OptiFlex Pro F Spray Operation

35
Activating the cleaning function
The cleaning mode can only be activated from standby mode (main menu
display, no powder conveying).
CAUTION
Bodily injury or large dust formation possible!
Uncontrolled escape of pulsating compressed air and powder can
cause eye or ear damage and respiratory problems.
Manual coating equipment type B:
► Lift the fluidizing/suction unit
► Point the fluidizing/suction unit and the gun into a suction unit
or into the booth
Manual coating equipment type F:
► Remove the hose feedthrough from the powder hopper
► Point the hose feedthrough and the gun into a suction unit or
into the booth
1. OR
2. Select the corresponding cleaning program:
OR OR
3. START =
– The automated cleaning procedure is started.
During the parallel operation (system parameter P09=1 Duo) both
application pumps are cleaned one after the other.