Rev. 00 04/19
16
Product description
OptiCenter OC06
Field of application
The powder management center is suitable for use in plants with a
completely closed powder circuit:
Conveying
–
Fresh powder directly from the (original) powder bag
–
Fresh powder from a Gema fresh powder system
–
Powder directly from the optional powder hopper
–
Precision conveying from the OptiSpeeder to the applicators
–
Recovered powder is returned to the system or target container
–
Powder level monitoring by level sensor(s)
Cleaning
–
Automatic internal cleaning of suction tubes, powder conveyors,
powder hoses and guns
–
Supply of the recovered powder
–
Closed powder circuit
– no powder escaping during coating or
cleaning procedure. This prevents powder loss, and the workplace
and the environment remain clean.
Reasonably foreseeable misuse
–
Operation without the proper training
–
Use of moist powder
–
Insufficient fluidization at the suction point
–
Use with insufficient compressed air quality
–
Input pressure too low
–
Use in connection with unauthorized coating devices or components
Summary of Contents for OptiCenter OC06
