User’s & Technical Manual –
P/I LEVEL TRANSMITTER PIT7000
GELEC
Industrial Electronics
PAGE
28
13.
TECHNICAL SPECIFICATIONS
PIT7000 GENERAL DATA
Unit dimensions (HxWxD)
95 x 25 x 85 mm
Minimum installation area (HxWxD)
170 x 26 x 86 mm
Weight
145 gr
Housing material
Polyamide (PA 6.6) - Green
Mounting
DIN rail NS32/NS35 (acc. to EN60715)
Degree of protection
IP20
Recommended installation position
Electrical control panel (vented)
Flammability rating according to UL 94
V2
Operating temperature
-
20 … +70
o
C ( -
4 … +158
o
F)
Storage temperature
-
20 … +70
o
C ( -
4 … +158
o
F)
Features
Internal pressure sensor
Silicone piezoresistive (Gauge)
Laser trimmed
Precise span and offset calibration
Temperature compensated
Sensor operating pressure range
(S) adaptor
0-10 kPa / 0-1.45 psi / 0-100cm H
2
O (S1 version)
0-50 kPa / 0-7.25 psi / 0-500cm H
2
O (S5 version)
Sensor proof pressure
(S) adaptor
50 kPa (S1 version)
100 kPa (S5 version)
Recommended air pressure supply
(P) adaptor
1,5 bar / 22 psi
Average air drain
150 cm
3
/min (approx.)
Resolution (H
2
O at 25
o
C)
0.35 mm (0.0005 psi) (S1 version)
1.23 mm (0.0017 psi) (S5 version)
Sensor linearity
±1.0
% FSS (S1 version)
-0.6 +0.4% FSS (S5 version)
Pressure hysteresis
±0.1% FSS
Temperature hysteresis
±0.5% FSS
Pneumatic connection characteristics
Pneumatic fittings
3 straight male adaptors for 6/4 mm tubes
Plastic connection tubes compatibility
6/4 mm (D/d)
PA6, PA11, PA12, Polyethylene,
Polyurethane, PTFE, FEP
ELECTRICAL DATA
Supply voltage
15-36 VDC
Power consumption
1W max